Environmental Protection Act 1986
Environmental Protection (NEPM-UPM) Regulations 2007
These regulations expired as at 30 Jun 2012 (see r. 14).
Environmental Protection Act 1986
Environmental Protection (NEPM-UPM) Regulations 2007
These regulations expired as at 30 Jun 2012 (see r. 14).
Western Australia
Environmental Protection (NEPM-UPM) Regulations 2007
Contents
Part 1 — Preliminary
1.Citation1
2.Terms used in these regulations1
3.Purpose4
Part 2 — Responsibilities of certain brand owners
Division 1 — Application
4.Application of this Part5
Division 2 — Action plans
5.Action plans5
6.Approval of action plans7
7.Review of action plans7
Division 3 — Targets
8.Targets8
Division 4 — Record keeping
9.Brand owner to keep information9
Division 5 — Compliance notice
10.Authorised person may give notice to comply10
Part 3 — Operators of materials recovery systems to give information to the CEO
11.Local governments12
12.Other operators12
Part 4 — Appeals
13.Appeals14
Part 5 — Expiry
14.Expiry15
Part 6 — Amendments to the Environmental Protection Regulations 1987
15.The Environmental Protection Regulations 1987 amended16
Notes
Compilation table17
Defined terms
Western Australia
Environmental Protection Act 1986
Environmental Protection (NEPM-UPM) Regulations 2007
2.Terms used in these regulations
In these regulations, unless the contrary intention appears —
brand owner means —
(a)a person who is the owner or licensee in Australia of a trade mark under which a product is sold or otherwise distributed in Australia, whether the trade mark is registered or not; or
(b)a person who is the franchisee in
(c)in the case of a product which has been imported, the first person to sell that product in
(d)in respect of in‑store packaging, the supplier of the packaging to the retailer; or
(e)in respect of plastic bags, the importer or manufacturer of the plastic bags or the retailer who provides the plastic bag to the consumer at the point of sale for the transportation of products purchased by the consumer;
consumer packaging means all packaging products, including distribution packaging, made of any material, or combination of materials, for the containment, protection, marketing and handling of retail consumer products;
Covenant means the National Packaging Covenant of July 2005;
distribution packaging means packaging that contains multiples of products (the same or mixed) intended for direct consumer purchase, including —
(a)secondary packaging used to secure or unitise multiples of consumer products such as a cardboard box, shipper and shrink film over wrap; and
(b)tertiary packaging used to secure or unitise multiples of secondary packaging such as pallet wrapping stretch film, shrink film and strapping;
landfill site means —
(a)a landfill site set apart by a local government under the Health Act 1911 section 119; or
(b)a landfill site licensed under the Act Part V; or
(c)premises to which the Environmental Protection (Rural Landfill) Regulations 2002 apply;
materials recovery system means a system to collect, sort and pre‑process materials recovered from the waste stream, including but not limited to —
(a)the roadside collection of domestic solid waste separated for the purpose of recycling or for otherwise using the materials so separated; or
(b)a drop‑off collection system; or
(c)a public place collection; or
(d)an industrial or commercial recycling collection system;
plastic bags includes a single use lightweight plastic carry bag made from virgin or recycled plastic;
premises means residential, industrial or other premises to which a receptacle for the collection of recyclable material has been delivered by the operator of a materials recovery system;
recovery rate, in relation to a type of consumer packaging listed in column 1 of the Tables to regulation 8(1) and (2), means the rate determined using the equation —
where —
R is the recovery rate;
WR is the weight of the consumer packaging recovered from the post‑consumer waste stream;
WS is the weight of the consumer packaging sold as packaging within
recyclable material means material reasonably able to be recovered, reprocessed and used as raw material for the manufacture of a new product;
recycle means recover a thing and use it as a raw material to produce another thing;
reuse means use a thing for the same or similar purpose as the original purpose without subjecting the thing to a manufacturing process which would change its physical appearance;
secondary resource means a resource used or to be used —
(a)to manufacture new consumer packaging or another product to replace raw or virgin materials; or
(b)for energy recovery;
signatory means a signatory to the Covenant, and includes an organisation that accedes to the Covenant after it is made, whether before or after the commencement of these regulations.
The purpose of these regulations is to require certain acts to be done for the purpose of implementing the NEPM cited as the National Environment Protection (Used Packaging Materials) Measure.
Part 2 — Responsibilities of certain brand owners
This Part applies to a brand owner other than a brand owner —
(a)who is a signatory to and complies with the Covenant; or
(b)who is not a signatory but the CEO is satisfied that the brand owner uses consumer packaging in which the brand owner’s products are sold in a way that achieves environmental outcomes at least equivalent to the environmental outcomes for the packaging under the Covenant; or
(c)who does not contribute significantly to the waste stream; or
(d)the value of whose annual sales of the brand owner’s products is not more than $5 million.
(1)A brand owner to which this Part applies must prepare and submit an action plan to the CEO —
(a)within 6 months of the commencement of these regulations or within 6 months of becoming a brand owner to which this Part applies, whichever is the later; or
(b)within 2 months of being required under regulation 7(2) to prepare and submit an action plan.
Penalty: a fine of $5 000.
(2)A person who commits an offence under subregulation (1) is guilty of a separate and further offence in respect of each month after the day of conviction during which the failure to prepare and submit an action plan continues and is liable in respect of each separate and further offence to a penalty of $5 000.
(3)The action plan must contain the following information —
(a)how the brand owner intends to ensure that consumer packaging in which the brand owner’s products are sold (owner’s packaging), or consumer packaging that is substantially similar to the owner’s packaging, is —
(i)recovered; and
(ii)reused, recycled or used for energy recovery;
(b)the quantity of each type of consumer packaging to be —
(i)recovered; and
(ii)reused, recycled or used for energy recovery;
(c)the recovery rate for each type of consumer packaging to be recovered;
(d)how the brand owner intends to inform the public of the way in which the consumer packaging may be recovered.
Penalty: a fine of $5 000.
(4)The recovery rate referred to in subregulation (3)(c) must be at least equivalent to the recovery rate for that particular type of consumer packaging specified in regulation 8.
(5)The action plan must state —
(a)that all consumer packaging to be recovered by or for the brand owner will be reused, recycled or used for energy recovery in the following order (the preferred order) —
(i)for reuse in the packaging of the brand owner’s own products; or
(ii)for use within the State as a secondary resource; or
(iii)for use within
(iv)for export as a secondary resource;
or
(b)if the brand owner considers it will be impracticable to reuse, recycle or use for energy recovery the materials in the preferred order —
(i)reasons why the brand owner considers the preferred order impracticable; and
(ii)the order in which the materials will be reused, recycled or used for energy recovery.
(6)A brand owner to which this Part applies must —
(a)prepare, maintain and implement an action plan; and
(b)comply with the plan.
Penalty: a fine of $5 000.
(1)If a person submits an action plan to the CEO under regulation 5(1), the CEO may —
(a)require that further particulars be supplied in relation to the action plan; or
(b)approve the plan; or
(c)reject the plan.
(2)If the CEO rejects an action plan, the CEO is to give the person who submitted it written notice of the rejection and the reasons for rejecting it.
(1)The CEO may review an action plan approved under regulation 6(1)(b) and cancel the action plan.
(2)If an action plan is cancelled, the CEO is to give the brand owner written notice of the decision to cancel it and may by the written notice require the brand owner to prepare and submit to the CEO, within the time specified in the notice, an action plan for approval.
(1)For the period beginning on 1 July 2007 and ending on 30 June 2008, a brand owner to which this Part applies must ensure that the recovery rate for the type of its consumer packaging listed in column 1 of the Table to this subregulation is not less than that listed in column 2 of that Table opposite the type of consumer packaging.
Penalty: a fine of $5 000.
Table
|
Consumer packaging |
Recovery rate |
|
Aluminium |
69% |
|
Glass |
47% |
|
Paper and cardboard |
72% |
|
Plastics: high‑density polyethylene (HDPE) |
|
|
Plastics: polyethylene terephthalate (PET) |
|
|
Plastics other than high‑density polyethylene (HDPE) and polyethylene terephthalate (PET) |
|
|
Steel |
54% |
(2)Beginning with the financial year commencing on 1 July 2010 and for each financial year after that year, a brand owner to which this Part applies must ensure that in each financial year the recovery rate for the type of its consumer packaging listed in column 1 of the Table to this subregulation is not less than that listed in column 2 of that Table opposite the type of consumer packaging.
Penalty: a fine of $5 000.
Table
|
Consumer packaging |
Recovery rate |
|
Aluminium |
75% |
|
Glass |
60% |
|
Paper and cardboard |
80% |
|
Plastics: high‑density polyethylene (HDPE) |
|
|
Plastics: polyethylene terephthalate (PET) |
|
|
Plastics other than high‑density polyethylene (HDPE) and polyethylene terephthalate (PET) |
|
|
Steel |
65% |
9.Brand owner to keep information
(1)A brand owner to which this Part applies must, for the financial year commencing on 1 July 2007 and for each financial year after that year, keep for at least 5 years the following information for each material used by the brand owner as consumer packaging (consumer packaging material) in the financial year —
(a)the total weight of consumer packaging material used by material type;
(b)the number of units of consumer packaging material by unit and material type;
(c)the total weight of consumer packaging material recovered by material type;
(d)the total weight of recovered consumer packaging material reused and recycled in
(e)the total weight of recovered consumer packaging material reused and recycled by material type through export;
(f)the total kilojoules of embedded energy recovered;
(g)the total weight of recovered consumer packaging material disposed of at a landfill site;
(h)how consumers have been advised as to how consumer packaging material is to be recovered.
Penalty: a fine of $5 000.
(2)A brand owner to which this Part applies must, if requested in writing by the CEO, give the information mentioned in subregulation (1) to the CEO within 28 days after the day the CEO requests it.
Penalty: a fine of $5 000.
Division 5 — Compliance notice
10.Authorised person may give notice to comply
(1)If an authorised person believes on reasonable grounds that a brand owner has contravened regulation 5 or 9, the authorised person may give the brand owner a written notice under this regulation.
(2)The notice must state —
(a)the act or omission comprising the contravention; and
(b)the action the brand owner may take to rectify the alleged contravention; and
(c)the day by which the brand owner must take the action.
(3)The stated day must be at least 2 months after the notice is given to the brand owner.
(4)A brand owner must comply with the notice unless the brand owner has a reasonable excuse for not complying with it.
Penalty: a fine of $5 000.
(5)A brand owner cannot be prosecuted for an alleged contravention of regulation 5 or 9 unless the brand owner —
(a)is given a notice under subregulation (1); and
(b)does not comply with the notice.
Part 3 — Operators of materials recovery systems to give information to the CEO
(1)This regulation applies to a local government if, in its district under the Local Government Act 1995, it operates a materials recovery system.
(2)The local government must, within 2 months after the end of each financial year in which the service operates, give to the CEO the following information relating to its district for the year —
(a)what percentage of premises is covered by the system;
(b)the number of premises participating in the system, expressed as a proportion of the number of premises to which the service is available;
(c)the number of premises covered by the system and whether the premises are residential or non‑residential;
(d)the fee (if any) charged in relation to each premises for the system;
(e)the total weight of recyclable material collected by the system by material type;
(f)if the material collected is sorted —
(i)the total weight of each material type sold or sent for reuse, recycling or energy recovery; and
(ii)the total weight of the residual fraction of each material type disposed of at a landfill site.
(1)This regulation applies to a person, other than a local government, if the person operates a materials recovery system.
(2)A person to whom this regulation applies must, within 2 months after the end of each financial year in which the system operates, give the CEO the information referred to in regulation 11(2)(a) to (f).
Penalty: a fine of $5 000.
(1)A brand owner aggrieved by —
(a)the rejection of an action plan under regulation 6(1)(c); or
(b)a decision of the CEO under regulation 7(1),
may, within 21 days after the day on which the person is given notice of the rejection or decision, lodge with the Minister an appeal in writing setting out the grounds of the appeal.
(2)An appeal lodged under subregulation (1) is to be treated as if it were an appeal under the Act section 102 and, for that purpose, the Act sections 102, 106, 107 and 110 apply as if the appeal were an appeal under section 102.
These regulations expire on 30 June 2012.
Part 6 — Amendments to the Environmental Protection Regulations 1987
15.The Environmental Protection Regulations 1987 amended
(1)The amendments in this regulation are to the Environmental Protection Regulations 1987*.
[*Reprint5 as at 11 March 2005.
For amendments to 1 February 2007 see Western Australian Legislation Information Tables for 2005, Table 4 and Gazette 29 September 2006.]
(2)Schedule 6 is amended as follows:
(a)by deleting the entry relating to the Environmental Protection (NEPM — UPM) Regulations 2003;
(b)by inserting at the end of the Schedule —
“
Table
|
Environmental Protection (NEPM-UPM) Regulations 2007 |
|
|
|
1.regulation 5(1)(a) |
250 |
500 |
|
2.regulation 5(1)(b) |
250 |
500 |
|
3.regulation 8(1) |
250 |
500 |
|
4.regulation 8(2) |
250 |
500 |
|
5.regulation 9(1) |
250 |
500 |
|
6.regulation 9(2) |
250 |
500 |
”.
1This is a compilation of the Environmental Protection (NEPM-UPM) Regulations 2007. The following table contains information about those regulations.
|
Citation |
Gazettal |
Commencement |
|
Environmental Protection (NEPM-UPM) Regulations 2007 |
27 Apr 2007 p. 1793‑812 |
27 Apr 2007 |
|
These regulations expired as at 30 Jun 2012 (see r. 14) |
||
[This is a list of terms defined and the provisions where they are defined. The list is not part of the law.]
Defined termProvision(s)
brand owner2
consumer packaging2
consumer packaging material9(1)
Covenant2
distribution packaging2
landfill site2
materials recovery system2
owner’s packaging5(3)
plastic bags2
preferred order5(5)
premises2
R2
recovery rate2
recyclable material2
recycle2
reuse2
secondary resource2
signatory2
WR2
WS2